Selected publications from PACCAR-affiliated faculty and their research groups

Journal Publications

M. Michel, C. Biswas, and A. B. Kaul, “High-performance ink-jet printed graphene resistors formed with environmentally-friendly, surfactant-free inks for extreme thermal environments,” Applied Materials Today 6, 16 (2017).

M. Michel, C. Biswas, R. Hossain, C. Tiwary, P. M. Ajayan, and A. B. Kaul, “A thermally-invariant, high-power graphite resistor for flexible electronics formed using additive manufacturing,” 2D Materials Journal (IOP) 4(2), 025076 (2017).

D. Fadil, R. F. Hossain, G. A. Saenz, and A. B. Kaul, “On the chemically-assisted excitonic enhancement in environmentally-friendly solution dispersions of two-dimensional MoS2 and WS2,” Journal of Materials Chemistry C 5, 5323 (2017); DOI: 10.1039/C7TC01001J; Article selected for back cover image.

G. L. Saenz, G. Karapetrov, J. Curtis, and A. B. Kaul, “Ultra-high photoresponsivity in suspended metal-semiconductor-metal mesoscopic multilayer MoS2 broadband detector from UV-to-IR with low Schottky Barrier contacts,” Nature Sci. Reports 8, 1276 (2018); DOI:10.1038/s41598-018-19367-1.

R. Hossain, I. Deaguero, T. Boland, and A. B. Kaul, “Large-format, biocompatible, ink-jet printed 2D-heterostructure photodetector on flexible substrates,” Nature npj 2D Materials and Applications Journal, 1(28) (2017); DOI: 10.1038/s41699-0170034-2.

D. K. Biswas, N. T. Tasneem, I. Mahbub, "Modeling the effects of displacements on link efficiency and propagation loss for a miniaturized wirelessly powered optogenetic implant" in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology (under review).

N. T. Tasneem, I. Mahbub, “A low-power dw-noise reconfigurable bandwidth BiCMOS neural amplifier,” 2018 IEEE 13th Dallas Circuits and Systems Conference (DCAS), Dallas, TX, 2018 (under review).

D. K. Biswas, I. Mahbub, “Duty-Cycled Low Power Impulse-Radio Ultrawideband (IR-UWB) Transmitter Designed in 130 nm BiCMOS Process,” 2018 IEEE 13th Dallas Circuits and Systems Conference (DCAS), Dallas, TX, 2018 (under review).

I. Mahbub, S. Shamsir, S. K. Islam, S. A. Pullano and A. S. Fiorillo, “A low noise front-end amplifier for pyroelectric transducer based respiration monitoring system,” 2017 IEEE International Midwest Symposium on Circuits and Systems (MWSCAS), Boston, MA, 2017.

I. Mahbub, S. K. Islam, S. Shamsir, S. A. Pullano, A. S. Fiorillo, M. S. Gaylord and V. Lorch, "A low power wearable respiration monitoring sensor using pyroelectric transducer," 2017 United States National Committee of URSI National Radio Science Meeting (USNC-URSI NRSM), Boulder, CO, 2017, pp. 1-2.

I. Mahbub M. S. Hasan, S. A. Pullano, F. Quaiyum, C. P. Stephens, S. K. Islam, A. S. Fiorillo, M. S. Gaylord, V. Lorch and N. Beitel, "A low power wireless apnea detection system based on pyroelectric sensor," 2015 IEEE Topical Conference on Biomedical Wireless Technologies, Networks, and Sensing Systems (BioWireleSS), San Diego, CA, 2015, pp. 1-3.

M. Sinclair, D. K. Biswas, T. Le, J. Hyde, I. Mahbub, L. Change, and Y. Hao, “Design of a flexible receiver module for implantable wireless power transfer (WPT) applications” 2019 USNC-URSI National Radio Science Meeting, Boulder, CO, 2019 (under review).

D. Lowell, J. Lutkenhaus, D. George, U. Philipose, B. Chen, and Y. Lin, “ Simultaneous direct holographic fabrication of photonic cavity and graded photonic lattice with dual periodicity, dual basis, and dual symmetry,” Opt. Express 25, 14444-14452 (2017).

D. Lowell, S. Hassan, M. Adewole, U. Philipose, B. Chen, and Y. Lin, “Holographic fabrication of graded photonic super-crystals using an integrated spatial light modulator and reflective optical element laser projection system,” Appl. Opt. 56, 9888 (2017).

D. Lowell, S. Hassan, O. Sale, M. Adewole, N. Hurley, U. Philipose, B. Chen, and Y. Lin, “Holographic fabrication of graded photonic super-quasi-crystals with multiple-level gradients,” Appl. Optics 57, 6598 (2018).

S. Hassan, D. Lowell and Y. Lin, “High light extraction efficiency into glass substrate in organic light-emitting diodes by patterning the cathode in graded superlattice with dual periodicity and dual basis,” J. Appl. Phys. 121, 233104 (2017).

S. Hassan, O. Sale, D. Lowell, N. Hurley, and Y. Lin, “Holographic Fabrication and Optical Property of Graded Photonic Super-Crystals with a Rectangular Unit Super-Cell,” Photonics 5, 34 (2018).

M. Adewole, D. Lowell, S. Hassan, D. George, H. Zhang, J. Cui and Y. Lin, “Broadband Plasmonic Total Light Absorption in an Al-doped ZnO/spacer/silver Stack Patterned with Graded Photonic Super-crystal,” Res. J. Opt. Photonics 1, 11000101 (2017).

S. Hassan, D. Lowell, M. Adewole, D. George, H. Zhang, and Y. Lin, “Extraordinary Light-Trapping Enhancement in Silicon Solar Cell Patterned with Graded Photonic Super-Crystals,” Photonics 4, 50 (2017).

S. Kumar,  X. Jiang, W. Shan, R. G. W. Jinadasa, K. M. Kadish, and H. Wang, “β-Functionalized trans-A2B2 push–pull tetrabenzoporphyrins,” Chem. Commun. 54, 5303-5306 (2018). Highlighted in back Cover page.

Y. Hu, M. B. Thomas, R. G. W. Jinadasa, H. Wang, and F. D’Souza, “Competitive Energy and Electron Transfer in β‐Functionalized Free‐Base Porphyrin–Zinc Porphyrin Dimer Axially Coordinated to C60: Synthesis, Supramolecular Formation and Excited‐State Processes,” Chem. Eur. J. 23, 12805-12814 (2017). Highlighted in Cover Page.

R. G. W. Jinadasa, B. Li, B. Schmitz, S. Kumar, Y. Hu, L. Kerr and H. Wang, "Monobenzoporphyrins as Sensitizers for Dye-Sensitized Solar Cells: Observation of Significant Spacer Group Effect," ChemSusChem 9, 2239 – 2249 (2016). DOI:10.1002/cssc.201600619.

L. Jiang, J. T. Engle, R. A. Zaenglein, A. Matus, C. J. Ziegler, H. Wang, M. J. Stillman, “Pentacene-Fused Diporphyrins”, Chem. Eur. J. 20, 1-7 (2014). Selected as a “hot paper”. DOI: 10.1002/chem.20140459.

M.L. Young, S. Gollerthan, A.Baruj, J.Frenzel, W.W.Schmahl, G.Eggeler, “Strain mapping of crack extension in pseudoelastic NiTi shape memory alloys during static loading,” Acta Materialia 61(15), 5800 (2013).  DOI: 10.1016/j.actamat.2013.06.024.

Y. Qiu, H. Yu, and M. L. Young, “Mechanical Properties of NiTi-Based Foam with High Porosity for Implant Applications,” Shape Memory and Superelasticity 1(4), 479 (2015). DOI: 10.1007/s40830-015-0040-1.

S. Briseño Murguia, J. Barclay, S. M. Aouadi, M. L. Young, “Surface Modification of Titanium Foams Produced by Freeze‐Casting,” Ch. 15; in Ceramic Transactions Series, Book Editor(s): N. P. Bansal, R. H.R. Castro, M. Jenkins, A. Bandyopadhyay, S. Bose, A. Bhalla, J. P. Singh, M. M. Mahmoud, G. Pickrell, S. Johnson, 2018. DOI: 10.1002/9781119423829.ch15.

S. Briseño Murguia, A. Clauser, H. Dunn, W. Grogg, L. Mello, Y. Snir, R.E. Brennan, and M.L. Young: “Low Pressure and Low Temperature Hydriding-Pulverization-Dehydriding Method for Producing Shape Memory Alloy Powders,” Shape Memory and Superelasticity, 4(2) 313-326, June (2018).

Conference Proceedings